Browse Categories

SL177I - 3 Pack - 120v AC Hearing Impaired LED 177CD Light (For Use with Smoke or CO Detector)

Retail: $391.41
Sale Price: $192.70
Usually Leaves Warehouse In 1-2 Bus. Days
Part #: SL177I
Manufacturer: Kidde - FireX
Part #: SL177I
Contractor Discounts Available - Email Sales@OliversHardware.Com
tax free
Description: The Kidde SLED177i is a 120VAC wire in unit that provides a visual warning when part of an interconnected system. This unit can be directly interconnected with Kidde smoke alarms, heat alarms and carbon monoxide alarms (a maximum of 24 devices of which 18 can by initiating). When triggered by a smoke alarm or heat alarm, it will produce a steady flash warning. When triggered by a carbon monoxide alarm it will produce an intermittent flash warning. The SLED177i has a 10 year limited warranty and is UL Listed. ATTENTION! The model SLED177i LED strobe light is designed to notify hearing impaired individuals of impending danger, it has no detection means and MUST be used in conjunction with operating interconnected Smoke, Heat, or Carbon Monoxide Alarms. Consumer Benefits: The Kidde SLED177i, used in conjunction with a smoke, heat or carbon monoxide alarm, provides a bright visual signal to warn of a smoke, heat or CO hazard. The Kidde LED SLED177i light benefits the hearing impaired, allowing a visual alert of a danger. This unit also includes a tamper resist pin that helps to deter thief and tampering. Architectural and Engineering Specifications: The LED strobe light shall be Kidde Unit SLED177i or approved equal. It shall be powered by a 120VAC, 60Hz source. The temperature operation range shall be between 32F and 120F (0C and 49C). The LED strobe light can be installed on any standard single gang electrical box, up to a 4 octagon junction box. The electrical connection (to the device) shall be made with a plug-in connector. A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices (Smoke, heat, CO, etc) interconnected. With 18 initiating devices, it is still possible to interconnect 6 strobe lights and/or relay modules. The unit can be directly interconnected with Kidde Safety 3-wire Smoke, Heat and CO alarms. It will produce an intermittent strobe flash pattern (approximately 4 flashes, followed by approximately 5 seconds off) when triggered by a Carbon Monoxide alarm, and a flash every second when triggered by a smoke or heat alarm. The unit shall at a minimum meet the requirements of UL1971, NFPA72, the State of California Fire Marshall, NFPA101 (One and two family dwellings, Federal Housing Authority (FHA), Housing and Urban Development (HUD), Americans with Disabilities Act (ADA). The unit shall be UL Listed. Technical Specifications: Power Source: 120VAC, 60HZ, Electrical Rating: 96 - 132 VAC, 60HZ, 630 mA max, Temperature Range: 32?F to 120?F (0?C to 49?C), Flash Rate: Fire: Constant 1 flash per second, CO: Intermittent 1 flash per second, (4 flashes, 5 seconds off), Light Output 177 Candela, Size: 5.6 in diameter x 3 depth, Weight: .85 lb, Interconnects: Up to 24 Kidde devices of which 18 can be initiating devices. Warranty: 10 year limited warranty.
Shopping Cart
Your cart is empty.

  Shopper Award Webutation